Peplink Enterprise Features

Peplink products come loaded with features that make your enterprise deployment easier, giving you greater control over your deployment, and increasing your network reliability in several ways.

Network Management
Built-In Remote User VPN Support
SIM-card USSD support
Time-Based Configuration
LAN as WAN
PepVPN Port Forwarding
Outbound policies within an SF Tunnel

Network Resilience
Drop-in Mode and LAN Bypass
High Availability via VRRP
USB Modem and Android Tethering
IP Passthrough Failover
SpeedFusion Disaster Recovery Support

Network Security
URL Logging
Content Blocking
Web Filtering Blacklists

Traffic Management
QoS: Clearer VoIP
Per-User Bandwidth Control
LACP NIC Bonding
Port-Based VLAN

Please note that features vary by model. Refer to the Balance model comparison and MAX model comparison for full details.


 

Built-In Remote User VPN Support

Use L2TP with IPsec to safely and conveniently connect remote clients to your private network. L2TP with IPsec is supported by most devices, but legacy devices can also connect using PPTP.

SIM-card USSD support

Cellular-enabled routers can now use USSD to check their SIM card’s balance, process pre-paid cards, and configure carrier-specific services. Click for full instructions


 

Time-Based Configuration

Enable and disable different functions (such as WAN connections, integrated AP, outbound policy, firewall, and PoE) at different times, based on a user-scheduled configuration profile. Click for full instructions..


 

LAN as WAN

With a software license, you can convert up to 3 LAN ports into WAN ports as the situation requires. This feature is available on the MAX HD4 and the Balance One.

PepVPN Port Forwarding

Designate ports for each of their LAN clients while running NAT Mode on PepVPN. This ensures that remote devices will be able to reach each LAN client individually. Click for full instructions


 

Configure Outbound Policies Within a SpeedFusion Tunnel

Configure outbound policy within a SpeedFusion Tunnel

create up to 5 SF tunnels from your Peplink router to the same remote location, each with different behavior. This gives greater control over how your network traffic is prioritized and routed.Click for full instructions


 

Drop-in Mode and LAN Bypass: Transparent Deployment

As your organization grows, it needs more bandwidth. But modifying your network would require effort better spent elsewhere. In Drop-in Mode, you can conveniently install your Peplink router without making any changes to your network. And if the Peplink router loses power for any reason, LAN Bypass will safely and automatically bypass the Peplink router to resume your original network connection.


 

High Availability via VRRP

When your organization has a corporate requirement demanding the highest availability with no single point of failure, you can deploy two Peplink routers in High Availability mode. With High Availability mode, the second device will take over when needed.


 

USB Modem and Android Tethering

peplink_advanced-features_usb-tethering

Video credits: 3Gstore.

For increased WAN diversity, plug in a USB LTE modem as backup. Peplink routers are compatible with over 200 modem types. You can also tether to smartphones running Android 4.1.X and above.

IP Passthrough Failover

While using IP Passthrough, routers can now failover from a Ethernet WAN to a Cellular WAN, using public IP addresses throughout the whole process.


 

SpeedFusion Disaster Recovery Support

When devices are connected to multiple SpeedFusion profiles, users can configure the OSPF cost of each SpeedFusion Connection. Remote networks are placed within the same subnet. This feature provides an additional layer of resilience to your SpeedFusion networks.Click for full instructions.


 

URL Logging

Track all the URLs visited by each user. This is particularly useful for complying with government and enterprise security requirements.Click for full instructions.

Content Blocking

Prevent unwanted usage of your Internet access by blocking Internet traffic based on web domain and by application.Click for full instructions.


 

Web Filtering Blacklists

Block domains from predefined web categories (e.g. adverts, file sharing). 2 levels of blacklists are available: light and full. The full version supports a larger blacklist with more specific categories.Click for full instructions.


 

QoS: Clearer VoIP

VoIP and videoconferencing are highly sensitive to latency. With QoS, Peplink routers can detect VoIP traffic and assign it the highest priority, giving you crystal-clear calls.

Per-User Bandwidth Control

With per-user bandwidth control, you can define bandwidth control policies for up to 3 groups of users to prevent network congestion. Define groups by IP address and subnet, and set bandwidth limits for every user in the group.


 

LACP NIC Bonding

Use 802.3ad to combine multiple LAN connections into a virtual LAN connection. This virtual connection has higher throughput and
redundancy in case any single link fails.

Port Based VLAN

Designate a LAN port to a specific VLAN and choose whether it should operate as a trunk port or an access port. Click for full instructions.