Instantly Connect from Anywhere
Redundant SIM Slots
Quad Cellular Modems and Redundant SIM slots allow you to use up to four different cellular providers for bandwidth bonding, data overage protection or eliminating blind spots.
Rated at 7.7G vibration resistance by the military MIL-STD-810H standard. Wide -40° – 113°F (-40° – 45°C) Temperature range.
The PDX has optional batteries allowing it to operate remotely for up to 9 hours.
Rapid Deployment for Public Safety
Deployable within minutes, the PDX offers Public Safety personnel the ability to establish stable and secure communications to headquarters from any emergency site. Equipped with built-in interfaces for WAN, LAN, and Wi-Fi, as well as antennas for cellular and GPS, the PDX can be used in remote and volatile situations.
Instant Connectivity for Temporary Sites
The PDX provides you with rapid deployment connectivity from the moment boots hit the ground. Combining the bandwidth of up to 4x Gigabit LTE connections, the PDX provides fast and reliable connectivity regardless of site location. Quickly and safely transmit project data, emails, plans, and blueprints between personnel, sites, and headquarters.
Event Live Streaming and Connectivity
Keep your event connected and your cameras streaming. With support for 4x Gigabit LTE connections, the PDX can keep your event connected no matter where it is held. The PDX has 8x 802.3at PoE ports, so you can simplify your cabling when connecting and powering your devices. It can also deliver 802.11ac Wi-Fi which supports a customizable captive portal with advertisements.
Speed & Reliability. Brought by SpeedFusion™
SpeedFusion allows users to combine any number of connections together to form a point-to-point link to achieve what others cannot:
Combine the bandwidth of several mobile connections to form an ultra-fast data link. Sustain bandwidth-hungry and latency sensitive tasks without the need for fixed lines.
Hot Failover maintains secure tunnels over all available WAN links to keep the network up and running when a connection drops out. If a WAN link fails, SpeedFusion instantly routes traffic to a working tunnel for uninterrupted VoIP sessions.
SpeedFusion is carrier agnostic and our products are certified with multiple carriers. By combining the coverage network of several mobile carriers, chances of running into a network blindspot or congestion is minimized.
With the help of WAN smoothing network traffic will be assigned to WAN connection with the lowest latency. Use multiple WAN connections to create a single, jitter-free data stream.
InControl 2. Powerful Cloud Management Platform
PDX is supported by InControl, Peplinks Cloud-Based SD-WAN Network Management Platform. Setup SpeedFusion networks, make bulk configuration changes, determine Firmware policy, build a custom captive portal. Do all this and more remotely using the InControl2.
WAN Interface 2x GE Ports*
4x Embedded LTE-A Modems with Redundant SIM Slots
LAN Interface 7x GE Ports* Wi-Fi Interface 802.11ac/a/b/g/n, 1166 Mbps 2×2 MIMO Wi-Fi WAN and/or AP Simultaneous Dual-Band PDX Throughput 2.5 Gbps PepVPN Throughput (No Encryption) | (256-bit AES) 600 Mbps | 500 Mbps Recommended Users 50-500 LTE-A Pro Modems Downlink/Uplink Per Modem:
600 Mbps/150 Mbps
Cellular and GPS Antennas 8x Cellular Antennas (Embedded)
1x GPS Antenna (Embedded)
4x Wi-Fi Antennas (Embedded)
Power Input DC: 12V – 56V, AC: 100V – 240V Power Output Up to 7x 802.3af PoE, 1x USB Power Outputs Power Consumption 38W (max.) Dimensions 19.7 x 14.8 x 7.7 inches |
500 x 375 x 195 mm
Weight 28.7 pounds | 13 kg Operating Temperature -40° – 113°F |
-40° – 45°C
Humidity 15% – 95% (non-condensing) Certifications FCC, IC, CE,
7.7G Vibration resistance, MIL-STD-810H 514.8E-1 Cat24, IP55/65^, [email protected], FirstNet%
Warranty 1-Year Limited Warranty
* 2x GE port is configured as a LAN port by default, configuration is changeable on the Web Admin. ^ IP55 certified. IP65 certification testing in progress.
^ IP55 certified. IP65 certification testing in progress.
@ Certification Pending.
% Tests completed, under FirstNet final review.
WAN Support for PPPoE, Static IP, DHCP
WAN Link Health Check
Bandwidth Allowance Monitor
USB 4G/3G Modem Support
Support for Dynamic DNS services
WAN Port Convertible into LAN Port
LAN DHCP Server for LAN Clients
Extended DHCP Option
DNS Proxy for LAN Clients
VLAN on LAN Support
Load Balancing Intelligent Failover
Per-Service Load Distribution
Security DoS Prevention
Web Filtering Blacklist
Complete VPN Solution PepVPN
-256-bit AES Encryption
-Pre-shared Key Authentication
-Local User, LDAP, RADIUS, Active Directory Authentication
IPsec VPN (Network-to-Network)
-X.509 Certificate Support
GRE Tunnel (Network-to-Network)
Advanced QoS User Groups
-Individual Bandwidth Limit
-By User Groups
-SIP, HTTPS, VPN QoS
-Custom Application QoS
Networking NAT and IP Forwarding
Many to One, One to One NAT
SIP ALG, H.323 ALG
VRRP HA Support
BGP, OSPFv2 and RIPv2 Support
AP Controller Auto AP Discovery
Auto AP Firmware Management
AP Profile Configuration
Wi-Fi Usage Statistics
Captive Portal Support for Wired and Wireless LAN Clients
Support RADIUS Authentication
Time and Usage Quotas on Open Access Mode
Built-in Customizable Splash Page
Device Management Web Administrative Interface
Command Line Interface
InControl Cloud Management
Active Client & Session Lists
Bandwidth Usage Statistics
SNMP v1, v2c and v3
Power Requirements DC Jack: 12V – 56V
- 1x Special Power Cord for PDX
- 1x Special Card Plug for PDX
Description PDX-BAT-KIT Pepwave PDX Battery Kit, 1x Metal Clamp, 1x Power Cable, 2x M3 Scr, 98Wh, 14.4V SFE-PDX-KIT
SpeedFusion Engine Duo Accessory Kit for PDX
Product Code Carrier/Region Embedded Modems 4G Bands 3G Bands PDX-LTEA-R-T America / CAT-12 4 B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B14 , B18, B19, B20, B26, B29, B30, B32, B41, B42, B43, B46, B48, B66 B1, B2, B4, B5, B6, B8, B9, B19 PDX-LTEA-K-T Global / CAT-12 4 B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B18, B19, B20, B26, B28 , B29, B30, B32, B41, B42, B43, B46, B48, B66 B1, B2, B4, B5, B6, B8, B9, B19