DC Rugged anchor DC IP55 anchor Peplink Device Connector

The Device Connector Rugged enables Ethernet devices to access wireless networks with unbreakable reliability. Using our signal bonding technology, Ethernet devices can connect using the combined bandwidth of 2.4GHz and 5GHz frequency Wi-Fi in a single LAN connection. The Device Connector is compatible with any access point, so you can just drop it in and go – no network reconfiguration or device upgrades needed. The Device Connector is available in the following models:

Device Connector Rugged
Device Connector Rugged

3×3 MIMO 11ac Wi-Fi
Rugged Metal Enclosure

Device Connector IP55
Device Connector IP55

2×2 MIMO 11ac Wi-Fi
Outdoor-Ready Enclosure

Point-to-Point Deployment


Using the Device Connector, the IP camera is able to upload videos using both the 5GHz and 2.4GHz frequencies at the same time. If one frequency loses connectivity, the other will seamlessly take over. If the network is using an AP from another vendor, frequency combination can also be achieved by forming a SpeedFusion tunnel between the device connector and a SpeedFusion-enabled router.

One Access Point, Multiple Devices


Multiple devices could connect to headquarters using both the 2.4GHz and 5 GHz frequencies coming from a single AP. This is achieved by hooking up a Device Connector to each device, and then connecting them any AP. Using this configuration, the device connectors will be able to form SpeedFusion connections with the Balance Router located at the network infrastructure, providing the enhanced reliability of combined bandwidth.

SpeedFusion Between Wi-Fi and Landline


The Device Connector can also combine a wired landline connection and a Wi-Fi connection. This configuration provides extra connection resilience and diversity: if one connection breaks, the other can still take over.

Multiple Devices, Multiple Access Points


Even with each frequency coming from a different AP, the Device Connector can combine the 2.4GHz and 5.0 GHz frequencies. To do so, simply place a SpeedFusion enabled router at your network infrastructure to receive the combined traffic. This configuration provides additional reliability; if one AP ceases to function for any reason, all devices can still connect using the other AP.







For fast and unbreakable connectivity over Wi-Fi, nothing beats the Pepwave Device Connector

Where to Buy?


 Device Connector RuggedDevice Connector IP55
Product CodeDCS-RUGDCS-GN-IP55
Wi-Fi Interface802.11ac/a/b/g/n 3x3 MIMO802.11ac/a/b/g/n 2x2 MIMO
Ethernet Port2x GE3 x GE
Hardware Features
EnclosureIndoor MetalIP55 Outdoor Enclosure
Dimension5.8 x 5.0 x 1.6 inches
147 x 128 x 40 mm
11.8 x 4.9 x 1.2 inches
300 x 124 x 31 mm
Weight0.96 pounds
435 grams
0.96 pounds
435 grams
Power InputDevice: 12V - 36V DC
AC Adapter: AC Input 100V – 240V / DC Output 12V
Terminal Block: 12V - 36V DC
802.3af PoE (Injector Not Included)
Power Consumption13W (max.)13W (max.)
Operating Temperature-4° – 149°F
-20° – 65°C
-40° – 149°F
-40° – 65°C
Humidity15% – 95% (non-condensing)
CertificationsFCC, CE, RoHS
Warranty1-Year Limited Warranty


Device Connector – Indoor Rugged


Product CodeProduct NameDescription
DCS-RUGDevice Connector Rugged802.11ac/a/b/g/n layer 2 client bridge in metallic indoor enclosure. Manageable by InControl cloud management.


Device Connector – Outdoor IP55 Compact

Device Connector IP55 dimensions

Ordering Information

Product CodeProduct NameDescription
DCS-GN-IP55Device Connector IP55802.11ac/a/b/g/n 300Mbps layer 2 client bridge in waterproof IP55 outdoor enclosure. Manageable by InControl cloud management.

Accessories for IP55 Models

Product CodeCompatible WithDescription
ACW-510DCS-GN-IP55Wall/pole mount with flexible ball joint for high-precision installation.
ACW-107DCS-GN-IP55802.3af/at PoE Injector
ACW-109DCS-GN-IP551x 56V/2.1A Power Supply and PoE License to Enable 802.3at PoE+ Output


Contact A Reseller

Technical Specifications

All specifications are subject to change without notice.