Wi-Fi Enabled Pepwave MAX Routers are capable of supporting HotspotSystem Wi-Fi. To do so, please follow these steps:

1) Connect the AP with HotspotSystem

Enter the router’s Web UI and navigate to Network > Captive Portal. The following screen will appear:

Enter captive-portal.peplink.com as the Hostname, and then select External Server for the access mode. For the Operator Username field, use your HotspotSystem login:

For the Location ID field, login to your HotspotSystem page and navigate to Manage > Locations. Enter the location ID of the hotspot you wish to apply your router to.

Press Save and Apply Changes, and now the Pepwave router will use your HotspotSystem Captive Portal. If you wish to enable Social Wi-Fi on your captive portal, please proceed to the next step.

2) Setup Social Wi-Fi

From your HotspotSystem UI, navigate to Manage > Locations, and then click the location you selected in the previous step

Click Modify Hotspot Data & Settings

Select Splash page and scroll down until you see the following menu:

For the Internal Login/Logout URL Set, select Custom

For the Internal Login URL, enter http://{UAMIP}:{UAMPORT}/logon

For the Internal Logout URL, enter http://{UAMIP}:{UAMPORT}/logoff

Now you just need to add the relevant domains onto your allowed networks so they do not get blocked. To do this, navigate to Network > Captive Portal, and under Allowed Networks, and click the button to add the domains.

Finally, you will need to setup whitelist domains on your HotspotSystem Wi-Fi. To do so, please refer to the following article.

Share on Facebook0Tweet about this on TwitterShare on Google+0Share on LinkedIn0Pin on Pinterest0Share on StumbleUpon0