Knowledge Base
Articles
Why are continuous ping failover tests failing?
When performing the following link failover test with Peplink Balance, some custom...
3/5 (324 votes) | Views: 1768 | Last Updated: 2009-11-09 | Article ID: 29
Obtaining a Diagnostic Report from a Peplink Balance Device
Carry out the following steps to obtain a Diagnostic Report from a Peplink Balance...
3.2/5 (335 votes) | Views: 4737 | Last Updated: 2009-08-30 | Article ID: 31
Balance not re-routing traffic on link failure?
It is very likely that you have not turned on health checking. The Balance d...
3/5 (237 votes) | Views: 1800 | Last Updated: 2009-08-13 | Article ID: 67
Possible Resolution for an unresponsive Peplink Balance in LAN
Sometimes customers may experience the problem with an unresponsive Peplink Balanc...
3/5 (191 votes) | Views: 1056 | Last Updated: 2008-12-29 | Article ID: 134
Restoring Factory Default Settings on a Peplink Balance Device
To restore the factory default settings on a Peplink Balance unit, perform the fol...
3/5 (204 votes) | Views: 1069 | Last Updated: 2010-05-05 | Article ID: 122
Unable to refer a DNS Record to a Foreign Domain
When creating a DNS record of certain types (most commonly MX, CNAME), it is very ...
3/5 (247 votes) | Views: 1963 | Last Updated: 2008-06-25 | Article ID: 87
Configuring port speed and duplex
Sometimes customers may experience abnormal slow throughput result or packet dropp...
3/5 (161 votes) | Views: 494 | Last Updated: 2009-08-31 | Article ID: 178
Using MAC Address Clone in Drop-in Mode
When setting up a Peplink Balance under Drop-in Mode in a network, sometimes custo...
3/5 (187 votes) | Views: 2150 | Last Updated: 2008-12-29 | Article ID: 133
Changing the MAC address of WAN interface
The MAC address of each WAN port can be changed.In order to change the MAC address...
3.2/5 (404 votes) | Views: 1494 | Last Updated: 2009-12-30 | Article ID: 41