Knowledge Base

Peplink Balance can conduct regular, periodic checks to closely monitor the health...

3.2/5 (330 votes) | Views: 5322 | Last Updated: 2010-05-04 | Article ID: 49

Peplink supports multiple IP address on WAN interface. To bind the IP addresses in...

3/5 (163 votes) | Views: 903 | Last Updated: 2010-03-08 | Article ID: 180

Peplink Balance distributes both inbound and outbound data traffic across multiple...

3.1/5 (389 votes) | Views: 9911 | Last Updated: 2009-07-23 | Article ID: 22

Inbound Load Balancing distributes inbound data traffic over multiple WAN links to...

3/5 (253 votes) | Views: 9195 | Last Updated: 2010-08-25 | Article ID: 123

When it comes to requirement for WAN connections, we need to consider whether it i...

3.1/5 (178 votes) | Views: 2203 | Last Updated: 2009-07-12 | Article ID: 162

Yes, failover is fully supported in Peplink Balance besides link aggregation and l...

3/5 (278 votes) | Views: 2490 | Last Updated: 2010-03-26 | Article ID: 91

A flexible rule-based configuration design enables the fine-tuning of outbound tra...

3/5 (201 votes) | Views: 4618 | Last Updated: 2010-02-11 | Article ID: 110

3.1/5 (60 votes) | Views: 892 | Last Updated: 2010-05-17 | Article ID: 232

3/5 (213 votes) | Views: 1845 | Last Updated: 2009-09-23 | Article ID: 192

When used with Peplink Site-to-Site VPN Bonding technology, Peplink Balance can co...

3/5 (203 votes) | Views: 3423 | Last Updated: 2010-07-07 | Article ID: 111

Inbound Load Balancing distributes inbound data traffic over multiple WAN links to...

3/5 (217 votes) | Views: 4336 | Last Updated: 2010-08-25 | Article ID: 125

To test the combined download speed of all WAN links, Peplink Balance Broadband Sp...

3.1/5 (151 votes) | Views: 1822 | Last Updated: 2009-08-30 | Article ID: 173